Exmark Radius E-Series commercial zero-turn riders provide the best of both worlds: The features lawn professionals need, like Series 3 (5" deep) UltraCut decks and maintenance-free spindle assemblies, while delivering value that makes this mower attractive to anyone with a lot of grass to mow. Cutting deck widths available: 44-, 48-, 52- and 60 inches.
Large Caster Tires: Radius models are equipped with large front caster tires. 13 x 6.5 pneumatic tires come standard on 48", 52", and 60" models and 13 x 5.0-6 on the 44" model. Powered by Exmark Engine: Equipped with Exmark's commercial-grade 24.5-horsepower 708cc V-Twin engine that features a dual barrel carburetor, cast iron cylinder liners and a quick oil drain hose raises the bar for productivity, durability and value. (Not available in California.) UltraCut Deck Technology: Exmark's exclusive UltraCut decks are featured on Radius models in a choice of 44- to 60-inch cut widths. Every UltraCut cutting deck features Exmark's exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance. Heavy Duty Unibody Frame: Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability. Quick Adjustable Rollover Protection System (ROPS): Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories. Fuel Gauge Window: Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models. Height of Cut Made Easy: The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.
Equipment Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.30 in.-diameter cutter housing contains 17mm (.67 in.)diameter spindle shaft and hex blade drive. Drive Tires: 22 x 9.5-12 K500 Tractor Frame: Unibody, welded, heavy-duty 2 in. X 3 in. rectangular tubular steel. Steering Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. Front Caster Tires: 13 x 6.5-6, smooth tread, pneumatic. Bushings Parking Brake: Lever-actuated pawl brake. Seat: High back seat with foam padded seat cushion, armrests and integral safety switch Electrical: 12-volt battery with 15-amp alternator. Standard Features: Engine hour meter, cup holder, tow hitch and jack receiver UPC: 193308000961 Power Components Engine Brand: Exmark Engine Model: LC2P77F Engine Displacement: 708 Engine Series: V-Twin Fuel System: Carbureted Engine Speed: 3,600 rpm Air Filter: Standard Engine Manufacturer's air filter Fuel Type: Gas Carbureted Fuel Capacity: 7-gallon (26.5-L) single fuel tank with single fill location. Fuel Indicator: Translucent Visual Drive: Hydro-Drive Drive Description: Dual Hydro Gear ZT2800, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. Speed: Infinitely variable speed selection from 0-8.0 mph (12.9 kmph) forward, 0-5.0 mph (8.0 kmph) reverse. Carb Compliant: No Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. ROPS: 2-post foldable ROPS standard with seat belt and latch. PTO Engagement: MagStop electromagnetic 125-ft-lb clutch Drive Wheel Release: Allows unit movement without engine running. Casters: .375 in. thick caster yoke arms Engine Spec: K5045 Decks Width / Cutting Deck: 52 in. Deck Style: Floating Deck Deck Style Description: Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch. Deck Construction: 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt. Blade Tip Speed: Approximately 18,500 fpm. Cutting Heights: 1.5 in. (3.8 cm) to 5.0 in. (12.7 cm) in 0.25 in. (.6 cm) increments, adjustable from operator's seat. Blades: 3 Blades at 18.00 in. Length Dimensions Width: 64.3 in. (163.3 cm) Length: 81.7 in. (207.5 cm) Height: 69.7 in. (177.0 cm) Curb Weight: 861 Radius E-Series Accessories Trash Container: Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information. Hydro Maintenance Kit: Kit includes: 5 Bottles Exmark Premium Hydraulic Oil and 2 Hydro Filters 3-Bushel Bagger Adapter: Adapter required for GC3602 3-Bushel Bagger (48" and 52" models). Extended Drive Lever Kit: 3-Bushel Bagger: Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.) 116-7042 spacer adapter required for 36" deck models. Tilt Frame & Seat ISO Mounts (44 Inch Requires #): Tilt frame and ISO mounts for added suspension Light Kit - LED: Better and brighter than ever, this quick-install light kit keeps your productivity going into the night. Low profile, and impact-resistant, this ROPS mounted accessory emits powerful light without the use of significant amperage capacity. 5-Gallon Bucket: Carry a 5-gallon bucket on your mower to pick up unwanted debris while mowing. Mount not included. Turf Striping Kit: Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs. Seat Cover- Suspension 20" Back: Protect your new seat or make your old one look new. Fabric coated for maximum water resistance and repellency. Cushioned for extra comfort. Elastic cord in bottom hem for custom fit. (Fits suspension seat.) Bucket Mount Kit: Easily attach a 5-gallon bucket to your mower to pick up unwanted debris while mowing. Bucket not included. Seat Cover-Standard 18" Back: Protect your new seat or make your old one look new. Fabric coated for maximum water resistance and repellency. Cushioned for extra comfort. Elastic cord in bottom hem for custom fit. (Fits standard seat.) Operator Controlled Discharge (Hand): The infinitely adjustable blocker door opens and closes, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools. Jack: Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included). Full Suspension Seat & Tilt Frame: Includes full suspension seat and tilt frame. Completing Kit - Powered: Completing Kit - Powered UltraVac: 2-bagger commercial-grade powered collection system. Switch between bag discharge and side discharge with quick-attach. Less clogging with larger-diamer tubes. Compact design minimizes trailer space for easy maneuverability. Dust reduction with sealed hoods. Front Bucket Mount & 5-Gallon Bucket: Easily attach a 5-gallon bucket to your mower to pick up unwanted debris while mowing Equipment Cover: Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It's constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit. Semi-Pneumatic Tire Assembly: Customize your ride with just the right caster tire. HD AIR CLEAR KIT: HD AIR CLEAR KIT UltraVac Completing Kit: KIT-COMPLETING 523S Sun Shade (ROPS): Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513) 2-Bag Collection System - Powered: Micro-Mulch System: The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping. Engine Maintenance Kit - Exmark V-Twin: Contains everything a do-it-yourselfer needs to keep their Exmark running like new. Includes oil, oil filter, fuel filter, air filter, spark plug and fuel treatment. 12-Volt Power Port: 12-Volt Power Port Specs
22 x 9.5-12 K500
7 gal. (26.5 L)
Side; Optional: Bag, Mulch