2021 eXmark LZX980EKC96RW0

Call For Price
Request Info

Manufacturer

Exmark

Year

2021

Model

LZX980EKC96RW0

Out of Stock
Overview
Specs

General

Overview
Specs

Description

With our top-rated Lazer Z X-Series, there are plenty of boxes to check. For starters, it's now available as a 96-inch gas powered zero-turn mower. You can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED technology which can boosts fuel efficiency up to 41%. The X-Series also features our UltraCut™ Series 6 deck in 52-, 60-, 72-, and 96-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. There's even a standard 12-volt adapter to keep devices charged. So, if you're looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.

Key Features

  • Patented RED Technology: Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.
  • UltraCut Series 6 Deck: This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
  • A New Level of Comfort: Comfort increases productivity. That's why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.
  • Productivity: Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.
  • Rear Discharge Deck: Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
  • Tool-less Belt Removal: Deck and hydro belt can be installed without using any tools.

Specification

Equipment

  • Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75 in.-diameter cutter housing with 25mm (1.18 in.) diameter spindle shaft, double row bearings, top and bottom, and splined blade driver.
  • Drive Tires: 24 x 12.0-12, 4-ply Turf Master®
  • Tractor Frame: Unibody, welded, heavy-duty 1.5 in. x 3 in. tubular steel.
  • Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Front Caster Tires: 13 x 6.5-6, smooth-tread, semi-pneumatic.
  • Parking Brake: Lever-actuated disc brake.
  • Seat: Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
  • Electrical: 12-volt battery with 40-amp alternator. Onboard Intelligence: RED Technology
  • Standard Features: engine hour meter and cup holder
Power Components
  • Engine Brand: Kohler
  • Engine Model: ECV980
  • Engine Displacement: 999
  • Engine Series: Command Pro™ EFI
  • Fuel System: Electronic Throttle Body
  • Engine Speed: 3,650 RPM
  • Air Filter: Heavy-duty canister air filtration system
  • Fuel Type: Gas EFI
  • Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location.
  • Fuel Indicator: Yes - electronic Sender
  • Drive: Hydro-Drive
  • Drive Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 18 cubic inch motors.
  • Engine HP: 38 hp
  • Speed: Infinitely variable speed selection from 0-10.5 mph (16.8 kmph) forward, 0-7.0 mph (11.3 kmph) reverse
  • Carb Compliant: No
  • Deck Lift: Electric over hydraulic push button control
  • Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • ROPS: 2-post foldable ROPS standard with seat belt and latch.
  • PTO Engagement: MagStop Electromagnetic 250-ft-lb clutch with spot brake
  • Drive Wheel Release: Allows unit movement without engine running.
  • Casters: .50 in. thick caster yoke arms.
  • Engine Spec: 3018
Decks
  • Width / Cutting Deck: 96 in.
  • Deck Style: Floating Deck
  • Deck Style Description: Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with finish cut baffles included.
  • Deck Construction: 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
  • Blade Tip Speed: Approximately 18,500 fpm
  • Cutting Heights: 1.0 in. (2.5 cm) to 5.5 in. (11.8 cm) in 0.25 in. (0.64 cm) increments.
  • Blades: 4 Blades at 24.50 in. Length
Dimensions
  • Width: 101.3 in. (257.0 cm), 72.5 in. @ 3 in. HOC when folded
  • Length: 95.8 in. (243.3 cm)
  • Height: 70.5 in. (179.1 cm)
  • Curb Weight: 2200
Lazer Z X-Series Accessories
  • Light Kit (not compatible with TC26): Light Kit
  • 12-Volt Power Port: 12-Volt Power Port
  • Black Side Bumper(requires 3231-7 & 104-8301: Black Side Bumper(requires 3231-7 & 104-8301
  • Extended Drive Lever Kit: Improve your elbow room while you operate with extended drive levers.
  • KIT 96 RD Baffle: KIT 96 RD Baffle
  • Harness Add-On Accessory Kit: Take the hassle out of dual accessory fit up with this add-on harness.
  • Hydro Maintenance Kit: Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)
  • Jack: Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).
  • Slow Moving Vehicle Sign Kit: Slow moving sign kit (NLZD)
  • Sun Shade (ROPS): Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)
  • Floor Mat: Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).
  • Jack Mount Receiver: RECEIVER-JACK MOUNT - Lazer Diesel White Non-Marking Side Bumper(requires 3231-7 & 104-8301): White Non-Marking Side Bumper(requires 3231-7 & 104-8301)

Engine

Engine Manufacturer

Kohler

Displacement

999cc

Engine Type

ECV980

General

Transmission

Hydro-Drive

Wheel Size

24 x 12.0-12, 4-ply Turf Master®

Fuel Capacity

12 gal. (45.4 L)

Deck

Deck Size

96 in.

Discharge Type

Rear

FREE SHIPPING
On all orders over $99.00
FREE SHIPPING
On all orders over $99.00
FREE SHIPPING
On all orders over $99.00
FREE SHIPPING
On all orders over $99.00
CONTACT US
APPOINTMENT TIME
carcross